How to Remove Feviquick from Skin, Hand, Fingers & and Other Surfaces

If you have ever accidentally broken the irreplaceable commemorative cup of your grandmother or fixed the toes part of your flip-flops, you have most likely used a feviquick — the gluey thing that sticks almost anything.

While that one small tube seems to be doing all the big jobs, they make a huge mess if they go to the wrong place. Even though, as carefully as we may try, mishaps do occur, and if you are dealing with a feviquick accident — try not to stress; we got you covered.

We have mentioned all the How’s so that you’ll be less oblivious when it comes to removing feviquick.

Feviquick has always been the savior — whether it be those adorable mugs that just got broke and fixed by feviquick or the sole of your shoes, they really help in DIY stuff. However, if they end up in the wrong places — they can make a mess — a mess that most people find challenging to deal with.

And we don’t blame them; removing feviquick or superglue or even gorilla glue is hard, but not impossible. So we happen to have just the information and guide you are looking for, so that the next time anyone gets stuck with a feviquick, you will know what to do.


What is Feviquick?


Feviquick or super glue is a strong adhesive that can bond almost anything. Since it is fast-acting, it adheres quickly and also dries very quickly. Feviquick are made from a type of acrylic resin known as cyanoacrylate. This cyanoacrylate reacts with hydroxyl ions that are present in water; since feviquick also has some water, the cyanoacrylate bonds tight and fast on most of the materials forming an unbreakable bond.



Now before we jump into the how’s, you will need to ensure that you have all the safety gear ready. By safety gear, we mean you can use gloves, glasses, and so forth things that will keep the feviquick going from all the wrong places.

Glasses can be conducive to prevent the glue from going into your eyes. In case if it goes in your eyes, use some warm water and reach out for assistance immediately.

One pro tip? There is a way around gluing your fingers or whatever you are trying to glue; just wear gloves. That way, even if things go south, you can simply slip the glove and can chill.


How to Remove Feviquick from Hands | Remove Super Glue from Hand:

Remove Feviquicking from Hands

Start off by washing your hands with warm water and soap, it may sound basic, but it is worth a shot. It might not work right away, so you will most likely try it a few times and see if it works. However, just make sure that you are not ripping your skin off, as it can lead to bleeding.

While in the process, you can also try to peel it off. This might be sufficient, especially if the feviquick has only stuck at one finger or a certain part of your hands. With that said, go cautiously and if you feel any agony or find that the skin is taking off, stop right away. While attempting make sure that the glue is dried and solid, don’t touch it when it’s sticky.

If this and warm water don’t work, you can go for acetone-based nail polish remover. For this, take a cotton swab and dip one end in the nail polish remover, make sure that you are dipping in small amounts. Next, apply it to the glue directly to your hand, and this will dissolve the bond. Once you have used it, wash the area with warm water and soap. Since the acetone will dehydrate your skin, ensure that you are applying some moisturizer to the part after washing your hands.


How to Remove Feviquick from Skin | Remove Super Glue from Skin:

Removeing Feviquick from Skin

When it comes to skin, you will have to soak your skin in warm water and slowly peel it away, just like removing it from your hands. As always, you can use acetone to remove the feviquick from your skins. Just dip small amounts of acetone on a cotton swab and apply it to your skin. After some minutes, wash it off with soap and warm water.

If your skin is sensitive to acetone and you have a feviquick to deal with, you can mix baking soda and olive oil and make a paste. Apply this paste on the glue and cover it like crazy, chill for 5 minutes. Rub the paste and try to peel the feviquick; you can keep adding the paste till the feviquick is covered and as needed.

In case if baking soda is not available, you can also use salt to add for abrasiveness. You can even use coconut oil and margarine.

FYI:- Feviquick can be removed by using an acetone-based nail polish remover, Acetone, Sandpaper, Hand sanitiser, Light fluid, Nitromethane, Olive oil, Soapy water, Warm water, or hot water, Rubbing alcohol, and White vinegar.

Besides that, you can also use peanut butter — yeah, you read it correctly. The oil in peanut butter can decimate the bond of feviquick, so if you are out of items, you can get peanut butter to eat and apply to your skin — classic one stone two birds situation.


How to Remove Feviquick from Glass | Remove Super Glue from Glass:

Removeing Feviquick from Glass

We all love to keep glassy surfaces clean, and we spend a ton of time doing so. Thus it can be daunting to remove the feviquick. However, we got some tricks under our sleeves to deal with that.

Firstly, you’ve guessed it, acetone — the one door to seek for when you are stuck with feviquick or super glue. Apply some acetone to a cloth or rag and keep wiping till the feviquick starts to peel. After that, you can remove the remnants of the feviquick with a razor or your fingernails.

You can even try some hand sanitizer or alcohol. Remember, when you are dealing with feviquick, keep some patience and be extra careful. That said, acetone can be used on any feviquick or super glue to remove it from hard surfaces or delicate ones like glass.

After you have removed the glue, make sure to wash the glass so that it is back to all shiny and glossy.


How to Remove Feviquick from Metal | Remove Super Glue from Metal:

Removeing Feviquick from Metal

When it comes to removing feviquick from metal, it is relatively easy and straightforward to deal with. This is because metals are assertive enough to deal with acetone without a hitch. Apply some acetone to the glued surface and wait for some minutes. Try to peel it off with a scrubber or some sharp or edgy object. Once you have successfully peeled it off, wash it with warm water, and you are on your merry way. However, when you are applying the acetone, make sure that it doesn’t get on other nearby material.


How to Remove Feviquick from Mobile Screen | Remove Super Glue from Mobile Screen:

Removeing Feviquick from Mobile Screen

Again, you are going to use acetone to remove that pesky glue from your mobile screen.  You can even use nail polish remover or rub alcohol etc. So apply the solvent to the sponge or cloth and rub the area while bolting it with a little pressure; it won’t come off quickly. Let the solvent sit on the glue for some minutes and try to keep rubbing the cloth; repeat as necessary.

Howbeit, make sure that you are not using sharp objects like a razor to peel the glue or feviquick from the mobile screen surface; it will scrape the surface. Once the glue is removed, rinse the screen with a damp cloth thoroughly.


Summing Up

Hopefully, you have dealt with the pesky mess of feviquick. Remember to scrape and wiggle the glue area before trying anything else; at times, this is sufficient enough to remove the glue. Feviquick is one of the amazing inventions that have helped a lot of people during the DIY time.

However, feviquick always seems to get where it’s not supposed to go, so if you have found yourself in a feviquick predicament — then try out the mentioned steps; they work! Now that you are acquainted with removing feviquick, when you are dealing with this super glue, try to be more patient and careful.

Thanks for reading; we will take our leave now, until we meet again — stay safe.

Founder at Best Indian | Website | + posts

I am tech writer who is passionate about technology and spearheads the core writing team on tech news

1 thought on “How to Remove Feviquick from Skin, Hand, Fingers & and Other Surfaces”

  1. My problem: When i am try to join my headphones with feviquick then all joints is fixed so can I remove it


Leave a Comment