How Kitchen Chimney is Installed

Cooking is liberating. Cooking is an art. Cooking is the best to show your love.

But this can be disrupted if your kitchen does not have a chimney.

A kitchen chimney is necessary if you want to cook in peace, without being covered in smoke. Moreover, it helps in reducing indoor air pollution by removing moisture and grease-filled air.

If you do not have a kitchen chimney installed already, it is high time you do it. Do not worry; we will help you with its installation process.


What does a Kitchen Chimney Do?

Kitchen Chimney

Historically, industrial chimneys go back to the Romans who used them to eradicate smoke from their bakeries.

In the 12th century, people with large houses started using domestic chimneys.

The following are some of the uses of a kitchen chimney:

Keeps the Air Clean

A kitchen chimney helps in removing toxic pollutants and hot gases from your kitchen. In addition, it reduces the proportion of carbon monoxide while keeping your kitchen air fresh.

You might not see it, but it will also remove bacteria and germs from your kitchen.


Protects Walls and Tiles

The smoke can damage your tiles or kitchen walls. But a kitchen chimney prevents that from happening. As it removes the smoke, your kitchen remains clean and tidy.


Cook in Peace

Cooking requires full attention. At times, the smoke can hinder your senses, leading to accidents.

Moreover, the smoke can also lead you to cough or to sneeze constantly.

But when you install a kitchen chimney, you remove such harmful smoke, giving you a healthy environment to cook.


Types of Kitchen Chimney

Basically, there are four types of kitchen chimneys:

Island Chimney

The island chimney hangs to the ceiling above the cooking hob. The platform and hob are located at the center of the kitchen, not attached to any wall.


Wall Mounted Chimney

As evident from the name, the wall-mounted chimney is fitted against the wall, and the hob is adjacent to the wall.


Corner Chimney

This type of chimney is fitted in the kitchen’s corner. The cooking top and hob are in the corner, against the wall.


Built-in Chimney

These are integrated inside the kitchen furniture and kept against the wall.


Steps to Install a Kitchen Chimney

Install a Kitchen Chimney

Installing a kitchen chimney is not easy, but not possible as well. We have described the easiest ways to install a kitchen chimney in the following manner:

Required Tools:

  • Hammer
  • Screwdriver
  • Pliers
  • Scissors
  • Measuring tape
  • Pen
  • Hacksaw


Factors to Check Before Installing a Chimney:

The following are some of the factors that must be checked before you start the installation process:


The chimney must go exactly over the stove. The central area of the chimney must be placed over the furnace. This structure should be such that the smoke can be removed from all directions.



Before you start installing the chimney, you must check the height between the chimney hood and the gas stove.

If you end up installing it too high, the chimney will remove the fresh air also. On the other hand, if it is too close, the chimney might catch fire, and  I am sure that’s the last thing you want in your kitchen.

For reference, it must be placed at least 30 inches above the stove.

Mark the measurements with a pen.



Once all the measurements are noted, it is time to attach the chimney.

Step 1: Attach the Parts

Nowadays, most of the chimneys come attached with no loose parts. If your kitchen chimney is detached, you can utilize the screws provided to join the spigot.


Step 2: Attach the Chimney to the Wall

Attach the chimney to the hood. Then, it is time to fasten the chimney to the wall.

According to the marking made earlier, begin drilling. Once you have drilled the walls, fit the plugs.

Place the hood on the wall. Continue drilling the fastening holes till there the heads are six mm from the wall.


Step 3: Use Duct Pipe and Bends

Keep the diameter of the duct pipe under 15 cm. This will avoid any sudden vibrating impacts.

Avoid using too many bends with the ducting pipe, and stick to two bends.


Step 4: Use the Spigot to Attach the Exhaust Pipe

To make it easier for customers, most of the chimneys come with a built-in spigot. With its help, you can easily attach the exhaust pipe. 


Step 5: Cutting of the Pipe

With a hacksaw, cut the pipe with an approximate diameter of six inches. This will allow the air to move and flow without any interruptions.


Step 6: Attach the Carbon Filter

You can even attach a carbon filter instead of the metal filters in case you are unable to duct to the outdoors.


Step 7: Install the Duct Covers

Utilize two plugs to attach the bracket and attach the duct cover.

Use the two screws on the bracket to attach the short duct. Take the lower area of the long duct, and try to put it in the two holes.

Fix the long duct into the short one. Fix it with two screws.


Step 8: Turn it ON

Once everything is in place, the chimney is ready to be used. But before that, turn it on for five minutes. Do not start cooking right away.

Adjust the speed according to your cooking requirements.


Precautionary Tips for Using Kitchen Chimney

The following are some of the precautionary tips that you must keep in your back pocket while using a kitchen chimney:

  1. Ensure the height and placement of the chimney. As mentioned earlier, it should at least be 30 inches above the hob.
  2. It is best to have a 3 phase voltage for kitchen chimneys.
  3. Maintain a separate duct for the smoke if you have a duct chimney.
  4. 4. DO NOT leave the gas burners open.
  5. The oil in the frying pans should be left unattended.



Installing a kitchen chimney can be made uncomplicated if you follow the steps correctly. Ensure that you wear rubber gloves while installing it. Moreover, turn off the main power supply to avoid any accidents.

Lastly, if you do not want to take any risks, simply call a technician. They would get the work done quickly and efficiently.

Founder at Best Indian | Website | + posts

I am tech writer who is passionate about technology and spearheads the core writing team on tech news

Leave a Comment