One of the mandatory elements of almost any water system is the water treatment system. This statement is equally true for residential buildings where water is used for drinking or domestic purposes and industrial enterprises. Various processes often involve water as a technical liquid, and its characteristics are even higher requirements than drinking. There are several methods of drinking water purification, which we have similarly described here.
Choosing a suitable drinking water treatment station in the house, cottage, or enterprise should be taken extremely seriously. The best way to do this is to address the issue at the design stage. This approach allows for the purchase and establishment of optimal operating conditions of the cleaning system at a minimum level of financial expenditure. Learn more about preparing drinking water in the cottage in one of our articles.
Determining and functionally prescribing drinking water treatment plants
Before drinking, the water purification system is understood to be integrated engineering equipment used in the water supply system. It is designed to bring the characteristics of the liquid to a level that allows its practical use as a drink and domestic or industrial purposes.
Water characteristics are determined using more than a hundred indicators. With some degree of conventionality, they are grouped into three species, characterizing the liquid’s chemical, microbiological, and parasitic properties.
Standard requirements for water used for drinking are regulated by regulatory documents – GOSTs and SanPinami. The optimal characteristics of the liquid used for washing and washing dishes are contained in the accompanying documentation for household appliances – washing and dishwasher. The operating conditions of the pipelines and the locking fixtures, which are also affected by the quality of the water, are reflected in the passports on materials and products. Fluid requirements at various plants are contained in the relevant technical documentation. The contents of the above documents must be considered when choosing and operating drinking water treatment systems.
The need to use drinking water treatment equipment in residential, public, commercial, and industrial buildings
The need to purify water used for drinking, for domestic or industrial purposes, is undeniable. The quality of the liquid has a direct impact not only on the comfort of living but also on the state of health of the person.
The life of pipelines and appliances depends on the characteristics of water. The results of the production process of enterprises from a wide variety of industries are also important. Industrial installations for drinking water purification are presented in our online store.
Particular attention should be paid to the competent treatment of water from autonomous water systems in the form of wells and various wells. In this case, the liquid does not pass the centralized water treatment systems, often having in its composition far on the most useful impurities and inclusions. Properly selected equipment, both for a country house and for a cottage, will get rid of a few unpleasant phenomena:
- increased turbidity and precipitation;
- Unpleasant smell;
Drinking water treatment equipment
Today’s Russian market for specialized equipment has a lot of drinking water treatment systems. They vary in various ways, including performance, cleaning quality, cost, and the types of equipment used. The most popular options for setting up drinking water treatment stations should be considered in more detail. Order a water purification system from a well in a country house to drink at our specialists.
Sorbate treatment of drinking water
A popular and effective method of deepwater purification for drinking purposes. The use of drinking water treatment systems involves using two types of coal filters – in the form of cartridges or stationary. The main advantage of this method is the versatility, which is expressed in the removal of impurities from the liquid of both organic and inorganic nature. But in the first case, we are talking only about connections with a low-molecular structure.
An important additional advantage of using various sorbents for water purification (besides coal, aluminum silicate, natural zeolite, or copper-zinc) is convenience in operation. The main drawback of equipment for the drinking water treatment system – a relatively small resource of interchangeable cartridges – is compensated by their reasonable cost and speed of replacement.
Removal of iron, magnesium, hydrogen sulfide, and turbidity
Iron drinking water purification systems are installed in both private homes and industrial plants. In this case, installations are used, which are columns of the fall type. They combine two cleaning methods that use deforestation and aeration filters. The first uses the mechanism of oxidation and deposition of iron contained in the water, followed by discharge into the drainage during the reverse flushing of the equipment. The second trigger chemical processes to remove manganese, hydrogen sulfide, iron, and other impurities from the liquid using oxygen.
This equipment is used mainly to clean drinking water from the well in country houses and cottages. This combination explains the popularity of alternative-filtration cleaning plants, which have several impressive advantages:
- The compactness of the equipment
- A large number of different models
- Easy to control, including the availability of fully automated systems
- Reasonable value both when buying and in operation;
- minimum requirements in the maintenance and care process.
Drinking water training station based on ion-exchange filters softening
The need for a drinking water treatment system is due to the high content of calcium and magnesium salts. In full accordance with the name, use the ion-exchange principle of action. Provide special resins that take away from the water negative metal ions and replace them with particles of safe sodium and hydrogen.
Equipment for cleaning drinking water based on ion-exchange filters is in high demand in the market, as they have several advantages with a minimum of disadvantages. The main advantages of installing water purification drinking water deservedly considered are versatility, affordable level of costs for purchase and use, and variety.
Reverse-istic drinking water treatment plants
The main working node of drinking water preparation is the reverse osmosis method is a semi-permeable membrane. When passing through it, the liquid is cleared of a variety of impurities and additives. Such equipment is widely used in drinking water preparation systems in residential buildings and similar industrial networks. An important advantage of reverse osmosis installations is the presence of installed models in front of the water treatment point and are drinking taps for water treatment systems. This further expands the already extensive area of practical use of the equipment. Reverse osmosis is the best drinking water treatment system.
Sterile equipment for cleaning and preparing drinking water
Drinking water purification and decontamination systems are often used when water is collected from wells or surface sources. Water decontamination is done with special devices called sterilizers or ultraviolet lamps. The direct effects of ultraviolet light are detrimental to organic impurities. The competent selection and use of such equipment to treat drinking water ensure the absence of harmful and dangerous microorganisms in the water.
Block-modular drinking water training station at industrial plants
In recent years, container-type drinking water treatment plants have become very popular. They are used in industrial plants and to prepare liquid for use for technological purposes.
A stationary industrial plant for drinking water treatment has several advantages:
- Compact sizes in a block-container format combined with high performance;
- Excellent quality of production, which is achieved in factory conditions;
- Minimum costs for transporting, installing, and connecting the system;
- automated individual drinking water purification systems.
Buy drinking water treatment plants for a country house or industrial enterprise can be available from us.
The main advantages of contacting us are an extensive range of products combined with the availability of price from the manufacturer. The own production of drinking water treatment systems allows you to complete the equipment on the customer’s order. The cost of our drinking water treatment plants is below the market average. As a bonus – professional advice and help in choosing a suitable system of drinking water purification.