5 Most Common Mixer Grinder Problems And Their Magical Solutions

A mixer grinder is undoubtedly one of the most essential kitchen appliances. However, like all other appliances, it also tends to wear down with time.

It’s pretty annoying when you are preparing a meal, and your mixer grinder suddenly stops working.

Although it is not always possible to call a professional, you can solve minor problems with your mixer grinder by yourself. But how!?

Don’t worry; we’re here to help you! In this article, we will tell you effective solutions to the 5 most common mixer grinder problems.

So let’s begin!


5 Most Common Mixer Grinder Problems And Their Solutions

1. There’s Leakage From Your Grinder

In a mixer grinder jar, the most common leakage causes are loose blades, fault with the gunmetal, a crack in the jars, etc.

Let’s dive into their details!

  1. Loose blade: If you notice that your mixer grinder has a loose blade, first, you need to check if it is assembled correctly. After that, you can simply tighten it using a screwdriver.
  2. Gunmetal: If even tightening the blade doesn’t help, then most probably the fault lies with the gun mettle of your mixer. Gunmetal has an average lifespan of 3-4 years. You’ll need a professional to get it replaced.
  3. Crack in the jar: If the jar of your mixer grinder is broken, then it’s time to say goodbye to your old mixer grinder and get a new one.


2. Your Grinder’s Blades Turn Blunt

Grinder's Blades

Over time, your grinder’s blades tend to lose their sharpness. In addition, when food is stuck in the blades during grinding, this reduces sharpness and speed. As a result, your food will be coarse even after you repeatedly grind it.

Here’s how you can fix it:

  1. Rock salt to the rescue: Put a tablespoon of rock salt in the grinder, make sure you have tightly closed the lid, and then switch it on. Repeat this process many times until you notice that the blade has become relatively sharper.
  2. Change the blade: You can change the blade either by yourself or with the help of a professional.

For the DIY method, clasp the coupler, which is located below the jar, with your hand and take off the blade with a spanner.

Then, place a knife and tighten it by turning the edge in an anti-clockwise direction.

However, if that also does not help, you always have the option to get the blade replaced.


3.  Broken Coupler

Over time, the coupler of your grinder stops working. If you grind frozen foods at high speed, there is an increased risk of breakage or damage to the coupler.

Here’s how you can fix the coupler:

  • Look for the coupler, which is at the bottom of your mixer grinder.
  • Hold the mixer using a napkin so that you don’t lose your grip.
  • With a screwdriver, slowly lift the broken coupler and rotate it clockwise to detach it
  • Now, you can attach a new coupler in the place of the old one. With a hammer, hit the new coupler slowly so that it connects to the machine.
  • Lift the mixer to check if it is properly attached. And you’re done!

However, if you do not wish to replace the coupler yourself, you can always have it replaced by a professional.


4. Your Grinder Shuts Down

Grinder Shuts Down

The mixer grinder usually shuts off due to the following reasons:

  1. Low-capacity motor: If your blender motor is not very strong and you have been using it for a long time, it heats up and shuts down automatically to avoid damage.

In such cases, turn off your mixer grinder and give it some rest for at least 30 minutes before using it again.

  1. Disrupted air circulation: Airflow is essential in preventing your mixer grinder from overheating. Ensure there is enough space for air to pass from the bottom surface of the machine to the platform where it is kept.
  2. Thick and hard Ingredients: If you grind a large quantity of ingredients or too hard ingredients in your grinder, it tends to shut down. Try adding some water while grinding, as this will help to break down the ingredients easily.
  3. Grinding at high speed: Your mixer grinder also switches off when you operate it at high speed for a very long time. In such cases, try reducing the quantity of your ingredients in the mixing jar.


5.  Your Mixer Grinder Keeps Tripping

If you notice that your mixer grinder keeps tripping, it means that either you’re using it for too long and or you’re putting hot ingredients into it for grinding.

Here’s how to fix this problem:

  • Turn off the machine and remove the jar.
  • Look for the red button (reset button) below the machine’s surface.
  • Press on the switch to reset and fix the jar.
  • Wait 10 minutes before turning it on.

Your mixer grinder will no longer trip!


Safety Tips To Follow While Operating Mixer Grinders

Safety Tips To Follow While Operating Mixer Grinders

Now that you know the most common mixer grinder problems and their solutions, here are some safety tips that you need to follow while operating your mixer grinder.

  • Always make sure your mixer grinder is turned off before removing jars to check ingredients.
  • Make sure that the mixer grinder is placed on an even surface during use.
  • Never overload the jar with ingredients.
  • Never put anything extremely hot in the jar.
  • Always check if the lid is tightly closed before using the mixer grinder.
  • Make sure that the jar fits into the appliance before you use it.
  • Do not operate the mixer with wet hands.



How to prevent my mixer grinder from overheating?

A mixer grinder is overheated when it runs for more than 3 minutes due to the rotation and friction of its blades. Don’t run your grinder continuously for longer than 3 minutes.


How to remove a stuck mixer jar?

Open the lid and remove the ingredients from the jar. Hold the handle of the jar, lift it, and rotate it anti-clockwise at the same time. It will be released.


Also Read:

How To Choose The Mixer Grinder

Food Processor vs Mixer Grinder

Best Food Processors In India



Mixer grinders are an integral part of modern kitchens. While it’s not possible to repair very damaged grinders yourself, you can always fix minor damages by following the tips we have mentioned.

However, it’s essential to follow safety precautions while operating or repairing your mixer grinder. If you feel that you aren’t able to fix the problem yourself, don’t hesitate to seek help from a professional.

We hope you find these tips helpful! If you still have any queries, please post them in the comments section below, and we’ll be happy to help you!

Founder at Best Indian | Website | + posts

I am tech writer who is passionate about technology and spearheads the core writing team on tech news

Leave a Comment